AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Tread depth gauge chart4/29/2023 In some locations, they may also no longer legally qualify as winter tires. If they are flush with the level of the tread, the tire is no longer suitable for winter driving conditions. Several winter tire models are equipped with winter tire wear indicators. If they are flush with the level of the tread, then the tire should be replaced. If you can see above his head you have less than 2/32. Tread wear indicators, or wear bars, are spaced evenly through the main grooves in the tire tread. Use a penny to measure between the tread by placing Lincoln on his head. Therefore, check your tires regularly, reduce your speed on wet and snowy roads and consider replacing your tires in good time.Įnsure your vehicle is equipped with the correct winter, summer, or all-season tires. On wet roads there is an additional increased risk of aquaplaning with fading tread depths. The tool will require a 389/390 watch/coin battery (not included) and comes with operating specifications including a digital. Features include a large LCD display with a range of 0-1 1/32 inches, zero reset at any position, units in mm or 32nds with a manual 'Off' and 'On'. On wet or snow-covered roads braking performance will progressively decline with lower tread depths. The TDG50 Digital Tread Depth Gauge is our entry level tire shop tool. Please consider that safe driving in wet and snowy weather conditions is affected by the tread depth, the pattern design and the rubber compound of the tread of your tires. These tires are not safe for driving and must be replaced. Braking distance and vehicle control are impaired. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). Tread is the rubber on the tire that touches the road. To ensure your safety, measure the tread depth as part of your regular vehicle maintenance. That being said, a tread depth that’s below 2/32 inches (1.6 millimeters) is so bad that you should replace the tires. You have to keep in mind that this tread depth won’t last forever and will wear out and get thin as you drive. Shallow tread grooves make it harder to control the vehicle in wet weather and the chance of aquaplaning increases. A new tire should have a tread depth of about 10/32 to 11/32 inches (8 to 9 millimeters). But if it's not deep enough, your car loses traction and suffers extended braking times. New tires come with a tread depth of 10/32 or 11/32, though off. However, drivers should replace their tires when they reach 2/32 or 1.6mm because, at this point, the tires can’t grip the road properly. Your tires form the essential bond between your vehicle and the ground. Tire tread depth is a critical component in tire safety, and a good tire tread depth is approximately 6/32 or deeper.
0 Comments
Read More
Leave a Reply. |